The 10½" passive radiator PR270WA01 was designed for high performance compact subwoofer applications. Optimized for working with the active 10½" subwoofer SW270WA01 but will function well with any suitable active subwoofer transducers.
Very rigid air dried paper cone to ensure piston motion at high levels
Rigid steel chassis with extensive venting for lower air flow speed reducing audible distortion
Low-loss suspension (high Qm) for better reproduction of details and dynamics
Conex spider for better durability under extreme conditions
Custom tunable by adding one or more of the three extra weights (included)
NOMINAL SPECIFICATIONS
Notes
Parameter
Before burn-in
After burn-in
Unit
Nominal size
10½
[inch.]
Effective radiating area, Sd
312
[sq.cm]
1
Resonance frequency (free air, no baffle), Fs - without additional mass - with additional 25 g mass - with additional 50 g mass - with additional 75 g mass - with additional 100 g mass - with additional 125 g mass - with additional 150 g mass - with additional 175 g mass
26 23.5 21.6 20.1 18.9 17.9 17.0 16.3
[Hz]
2
Moving mass, incl. air (free air, no baffle), Mms, without extra weights
112
[g]
1
Suspension compliance, Cms
0.33
[mm/N]
1
Equivalent air volume, Vas
46
[lit.]
1
Mechanical Q, Qms - without additional mass - with additional 25 g mass - with additional 50 g mass - with additional 75 g mass - with additional 100 g mass - with additional 125 g mass - with additional 150 g mass - with additional 175 g mass
24 26.5 28.9 31.0 33.0 34.9 36.7 38.4
[-]
Maximum cone travel, mechanical limits, Xmax
±20
[mm]
Total unit net weight excl. packaging (incl. 3 extra weights)
0.64
[kg]
Note 1
The unit is not burned in before shipping.
Note 2
The moving mass may be increased in 25 g steps up to a maximum of +175 g by adding one or more of the three extra weights that are included with the unit.
OUTLINE DRAWING AND NOMINAL DIMENSIONS (mm)
PACKAGING AND ORDERING INFORMATION
Part no. PR270WA01-01
Individual packaging (one piece per box), incl. 3 separate weights
